INCH-POUND
MIL-DTL-0048683B (AR)
14 April 2004
USED IN LIEU OF
MIL-C-48683A (AR)
26 October 1987
DETAIL SPECIFICATION
CARTRIDGE 40MM PRACTICE - TP M918-
PROJECTILE ASSEMBLY FOR METAL PARTS AND
LOADING, ASSEMBLING AND PACKAGING
This specification is approved for interim use by the U.S. Army Armament Research,
Development and Engineering Center (ARDEC). Other activities in the Department of
Defense may use this interim revision or may continue using MIL-C-48683A (AR).
1. SCOPE
1.1 Scope. This specification covers the metal parts and loading, assembling and
packaging for one type of projectile assembly for use in the Cartridge, 40MM: TP,
M918.
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 and 4
of this specification. This section does not include documents in other sections of this
specification or recommended for additional information or as examples. While every
effort has been made to ensure the completeness of this list, document users are cautioned
that they must meet all requirements of documents cited in sections 3 and 4 of this
specification, whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications,
standards and handbooks form a part of this document to the extent specified herein.
Unless specified, the issues of these documents are those cited in the solicitation .
Comments, suggestions, or questions on this document should be addressed to: Commander, US
Army ARDEC, ATTN: AMSRD-AAR-QES-E, Picatinny, New Jersey 07806-5000, or e-mailed
to ardec-stdzn@pica.army.mil. Since contact information can change, you may want to verify
the currency of this address information using the ASSIST Online database at
https://assist.daps.dla.mil.
AMSC N/A
FSC 1310
DISRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business