MIL-DTL-0045585E (AR)
11018218
Operating Instructions for use with Gage,
Holding Fixture B11018116
11018350
Gage, Simulated Cartridge
11018351
Gage, Functional
11018354
Gage, Flush Pin
11018355
Gage, Special Snap
11018356
Gage, Holding Fixture
11018357
Gage, Holding Fixture
12989029
Operating Instructions for Indicator Gage 8441408
(Copies of these drawings may be requested online at drawing-request@pica.army.mil, or
from U.S. Army ARDEC, ATTN: AMSRD-AAR-AIS-TD, Picatinny NJ 07806-5000.)
2.3 Non-Government publications. The following document form a part of this
document to the extent specified herein. Unless otherwise specified, the issues of these
documents are those cited in the solicitation or contract (see 6.2).
AMERICAN SOCIETY FOR TESTING AND MATERIALS
INTERNATIONAL (ASTM)
ASTM B117
Standard Method of Salt Spray (Fog) Testing
ASTM E18
Standard Methods of Test for Rockwell Hardness
and Rockwell Superficial Hardness of Metallic
Materials
(Copies may be requested online at www.astm.org or ordered from the American Society
for Testing and Materials, 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959).
2.4 Order of precedence. In the event of a conflict between the text of this
document and the references cited herein, the text of this document takes precedence.
Nothing in this document, however, supersedes applicable laws and regulations unless a
specific exemption has been obtained.
3. REQUIREMENTS
3.1 First article. When specified in the solicitation or contract order (see 6.2), a
sample shall be subjected to first article inspection in accordance with 4.3.
3.2 Materials. Materials, parts and assemblies shall comply with requirements
specified on the applicable drawings and referenced specifications.
3.3 Functioning. Links shall be assembled into belts using Government standard,
M385 Practice ammunition and fired in intermittent bursts of 5 to 15 rounds from the
MK19, MOD III, Grenade Machine Gun, without malfunctioning, cracking, breaking or
separating.
3
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business