INCH-POUND
MIL-DTL-0063092B (AR)
05 April 2004
USED IN LIEU OF
(See 6.15)
DETAIL SPECIFICATION
CARTRIDGES, 40MM, WHITE STAR, PARACHUTE, M583A1
GREEN STAR, PARACHUTE, M661
RED STAR, PARACHUTE, M662
METAL PARTS AND
LOADING, ASSEMBLIES
This specification is approved for interim use by the U.S. Army Armament Research,
Development and Engineering Center (ARDEC). Other activities in the Department of Defense
may use this interim revision or may continue using documents listed in paragraph 6.16.
1. SCOPE
1.1 Scope. This specification covers the metal parts and loading, and assembling for
three cartridges with different color illuminants designated as Cartridge, 40mm, White Star
Parachute, M583A1, Green Star, Parachute, M661 and Red Star Parachute, M662.
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 or 4 of this
specification. This section does not include documents in other sections of this specification or
recommended for additional information or as examples. While every effort has been made to
ensure the completeness of this list, document users are cautioned that they must meet all
requirements documents cited in sections 3 or 4 of this specification, whether or not they are
listed.
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications, standards
and handbooks form a part of this document to the extent specified herein. Unless otherwise
specified, the issues of these documents are those cited in the solicitation or contract (see 6.2).
Comments, suggestions, or questions on this document should be addressed to: Commander, U.S.
Army ARDEC, ATTN: AMSRD-AAR-QES-E, Picatinny, New Jersey 07806-5000 or e-mailed to
ardec-stdzn@pica.army.mil. Since contact information can change, you may want to verify the
currency of this address information using the ASSIST online database at
https://assist.daps.dla.mil.
AMSC N/A
FSC 1310
DISRIBUTION STATEMENT A. Approved for public release; distribution is unlimited
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business