INCH-POUND
MIL-DTL-0060945E (AR)
11 July 2008
USED IN LIEU OF
MIL-DTL-60945D
21 November 2006
DETAIL SPECIFICATION
CARTRIDGE, 40 MILLIMETER, PROJECTILE ASSEMBLY, PRACTICE - M385A1
Inactive for new design after 12 February, 1996
This specification is approved for use by U.S. Army Armament Research, Development and
Engineering Center (ARDEC) and is available for use by all Departments and Agencies of the
Department of Defense.
1. SCOPE
1.1 Scope. This specification covers the requirements, examinations and tests for the
Cartridge, 40 Millimeter - Projectile Assembly, Practice - M385A1.
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 or 4 of this
specification. This section does not include documents in other sections of this specification or
recommended for additional information or as examples. While every effort has been made to
ensure the completeness of this list, document users are cautioned that they must meet all
requirements of documents cited in sections 3 or 4 of this specification, whether or not they are
listed.
Comments, suggestions, or questions on this document should be addressed to: Commander, US
Army ARDEC, ATTN: AMSRD-AAR-QES-E, Picatinny, New Jersey 07806 5000 or emailed to
ardecstdzn@conus.army.mil. Since contact information can change, you may want to verify the
currency of this address information using the ASSIST Online database at
https://assist.daps.dla.mil.
AMSC N/A
FSC 1310
Distribution Statement D. Distribution authorized to the Department of Defense and U.S. DoD
contractors only to protect, Critical Technology, as determined 1 April 2008. Other requests
shall be referred to the Office of the Project Manager for Maneuver Ammunition Systems,
ATTN: SFAE-AMO-MAS-SMC, Picatinny, NJ 07806-5000
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business