MIL-DTL-0048684B
3.6 Ammunition lot numbering. Ammunition Lot Numbering shall be assigned in
accordance with MIL-STD-1168.
3.7 Primer functioning.
3.7.1 Primer functioning. The primer shall function without evidence of misfires
(see 6.8.3) and in accordance with MIL-P-60942. There shall be no evidence of primer
leak as evidenced by perforation of primer cup or smoke deposit on base plug or cartridge
case.
3.7.2 Primer deterioration. For deterioration function see paragraph 4.5.3 of
MIL-P-60942; furthermore there shall be no evidence of primer leak as evidenced by
perforation of primer cup or smoke deposit on base plug or cartridge case.
3.8 Workmanship. All parts and assemblies shall be fabricated, loaded and
assembled in a thorough and workmanlike manner. They shall be free of burrs, chips,
sharp edges, cracks, dirt, grease, rust and other foreign matter. The cleaning method used
shall not be injurious to any parts, nor shall the parts be contaminated by the cleaning
agents. Exterior surface coatings shall be continuous; however, a few light scratches not
exposing base material may be permitted. All marking and stamping shall be neat and
sharply defined.
4. VERIFICATION
Table I. Requirements/Inspection Cross Reference Matrix
METHOD OF INSPECTION
CLASSES OF INSPECTION
N/A - Not applicable
A - First article
1 - Analysis
B - Conformance
2 - Demonstration
3 - Examination
4 - Test
Section 3
Inspection
Inspection
Section 4 Inspection Method
Requirement
Methods
Class
N/A
1
2
3
4
A
B
3.1
XX
X
X
4.3
3.2
XX
X
X
X
4.3, 4.4, 4.5.1, 4.5.2, 4.5.3, 4.5.6,
4.5.7
3.3
X
X
X
4.5.4
3.4
X
X
X
4.5.5
3.5
X
X
X
4.5.8
3.5.1
X
X
X
4.5.8.1/Table III
3.5.2
X
X
X
4.5.3/Table III
3.5.3
X
X
X
4.5.8/TableIV
3.5.4
X
X
X
4.5.8/4.5.8.2/Table III
3.6
X
X
X
4.5.9
3.7.1
X
X
Table III
3.7.2
X
X
4.5.1.1/Table III
3.8
X
X
X
4.5.11
4
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business