D-C-00115 - Cartridge, Projectiles, Gas And Flare (And Shells)
JAN-C-770 - Cartridge, Shot, Caliber .45, M15
MIL-B-48227 - Bandoleer, 40Mm Ammunition, Support, Plastic For
This specification covers two (2) types of support, plastics for use with Bandoleers, for Cartridges: 40MM Ammunitions.
MIL-B-48228 - Bandoleers For Cartridges, 40Mm Ammunition
This specification covers two (2) types of Bandoleers for use in 40MM Ammunition.
MIL-B-50262 - Burster, Projectile, M21, Loading Assembling And Packing
This specification covers the loading, assembling and packing of one burster designated as Burster, Projectile, M21.
MIL-B-50485 - Bandoleer Assembly For Cartridge, 40Mm, M397, M397E1 And M433
This specification covers one type of bandoleer designated as Bandoleer Assembly, for Cartridge, 40MM, M397, M397E1 and M433.
MIL-B-50999 - Booster, Auxiliary, M122, Metal Parts For, And Assembly And Loading Of
This specification covers the metal parts, assembly and loading for the M122 Auxiliary Booster used in the M567 Fuze.
MIL-B-51298 - Body Assembly, M674 And M675 Cartridges
This specification covers one type of virgin butyl rubber body for a cartridge.
MIL-B-60319 - Burster, Projectile, M19 Loading, Assembling And Packing
This specification covers the loading, assembly and packing for one type of burster designated as Burster, Projectile, M10.
MIL-C-11766 - Cartridge, 75-Mm, Rifle M311A1, Wp Filling Assembly
MIL-C-12825 - Cartridge, Smoke, Wp, Smoke, M308A1, For 57 Mm Rifle, M18, Cartridge, Wp, T186, For 57 Mm Rifle, T66E2 Cartridge, Smoke, Wp, M311A1, For 75 Mm Rifle, M20 Assembling, Marking And Packing
MIL-C-1387 - Cartridge, He, At, M307, W/Fuze, Pi, M90, For 57-Mm Rifles Assembling, Marking And Packing
MIL-C-1391 - Cartridges, He M306A1, And T115E2 For 57-Mm Rifles Cartridge, He, M309A1, For 75-Mm Rifles Assembling, Marking And Packing
MIL-C-14750 - Cartridge, 60Mm, He, M49A4 Loading, Assembling And Packing
This specification covers the loading, assembling and packing of high explosive cartridge designated as the M49A4 for use with the 60mm Mortar.
MIL-C-14834 - Cartridge Case And Base Plug 40Mm, Xm199E2
MIL-C-14836 - Case, Projectile, Burster, M9A1
This specification covers Case, Projectile, Burster, M9A1.
MIL-C-14968 - Cartridge, 57Mm, Smoke, Wp, M308A1 Assembling, Marking And Packing
This specification covers the assembling, marking and packing for one type of cartridge designated as Cartridge, 57MM, Smoke, WP, M308A1, for use with the 57MM rifle, M18.
MIL-C-18738 - Cartridge Cases, Brass (Other Than Small Arms), General Specification For
MIL-C-18740 - Cartridge Cases, Brass, 40-Millimeter
MIL-C-18751 - Cartridge, H.E.T. And H.E.I.T., 40Mm, (With Tracemark 11 And Mods
MIL-C-18757/1 - Cartridge Case, Steel, 40-Millimeter, Mk 3 Mod 0
This specification covers the requirements for the 40-millimeter Mk 3 Mod 0 Steel Cartridge Case.
MIL-C-18834 - Cartridge Case, Steel, 40 Millimeter, Mk 3 Mod 0 (Use Mil-C-18757/1)
MIL-C-18877 - Cartridge, A.A., Apt, 40Mm
MIL-C-20453 - Cartridge, Ignition, M4, For 60 Mm, Mortar Ammunition
MIL-C-20566 - Cartridge, Ap&T, M81A1, For 40 Mm., A.A.Guns, Loading, Assembling, Marking, And Packing
MIL-C-3972 - Cartridge, 60Mm, Illuminating, M8A3 With Fuze, Time, M65A1 Loading Assembling And Packing
This specification covers the loading, assembling and packing for one type of illuminating cartridge designated as M83A3 for use with 60MM Mortars.
MIL-C-46236 - Case, Cartridge, 37Mm, Mk1A2
This specification covers Case, Cartridge, 37MM, MK1A2.
MIL-C-46660 - Cartridge, 37Mm, Tp, M63 Mod, 1, W/Fuze, Bd, M58, Practice, Loading, Assembling And Packing
MIL-C-48036 - Cartridge, Test, 40Mm, Ball Assembly For Metal Parts
MIL-C-48044 - Cartridge, 40Mm, Proof, Xm387E4 Loading, Assembling And Packing
This specification covers the loading, assembling and packing for one type of cartridge designated as Cartridge, 40MM, Proof, XM387E4.
MIL-C-48045 - Cartridge, 40Mm, Proof, Xm387E4: Body Assembly And Ogive For Metal Parts
This specification covers the metal parts for one type of body assembly and ogive.
MIL-C-48050 - Cartridge, 57Mm, Canister, T25E5 Loading, Assembling And Packing
MIL-C-48069 - Cartridge, 40Mm, High Velocity, Dummy, M922A1 Assembling And Packaging
This specification covers the requirements, examinations and tests for the assembling and packaging for one type of cartridge designated as Cartridge, 40mm Dummy, M922A1.
MIL-C-48070 - Case, Cartridge Assembly, 40Mm, M169, Inert Metal Parts For
This specification covers the metal parts for one type of case cartridge designated as Case Cartridge Assembly, 40MM, M169, Inert.
MIL-C-48082 - Cartridge, 40Mm, Hedp, M433; Spitback Assembly For Metal Parts And Loading, Assembling And Packaging
This specification covers the metal parts and the loading, assembling and packing for one type of spitback designated as Spitback Assembly for use in Cartridge, 40MM, HEDP, M433.
MIL-C-48115 - Cartridge, 40Mm, Hedp, M430; Spitback Assembly For Metal Parts And Loading, Assembling And Packing
This specification covers the metal parts and the loading, assembling and packing for one type of spitback designated as Spitback Assembly for use in Cartridges 40MM HEDP, M430.
MIL-C-48150 - Cartridge, 40Mm, Star Parachute, Xm661 And Xm662 Metal Parts For
MIL-C-48151 - Cartridge, 40 Mm, Star, Parachute Xm661 And Xm662 Loading, Assembling And Packing
MIL-C-48161 - Cartridge, Ignition, 702 Parts For (S/S By Mil-Dtl-32246)
This specification covers the requirements and quality assurance provisions for the fabrication of parts and packing of parts for M702, Ignition Cartridge for the 60MM Lightweight Company Mortar System.
MIL-C-48162 - Cartridge, Ignition, M702 Loading, Assembling And Packing (S/S By Mil-Dtl-32246)
This specification contains requirements and provides quality assurance provisions for the loading, assembling and packing of the M702 Ignition Cartridge for the 60MM light Weight Company Mortar System.
MIL-C-48180 - Cartridge, He, 60Mm, M49A4E1 Loading, Assembling And Packing
This specification covers the loading, assembling and packing for one type of high explosive mortar cartridge designated as Cartridge, HE, 60MM, M49A4E1.
MIL-C-48247 - Cartridges, 40Mm, Smoke, Ground Marker Xm713, Xm714, Xm715 And Xm716 Metal Parts For And Loading, Assembling And Packing
MIL-C-48258 - Cartridge, 40Mm, Practice, M407A2, Projectile Metal Parts For
This specification covers the parts for one type of cartridge designated as Cartridge, 40MM, Practice, M407A2.
MIL-C-48259 - Cartridge, 40Mm, Practice, M407A2 Loading, Assembling And Packing
This specification covers the loading, assembling and packing for one type of Cartridge designated as Cartridge, 40MM, Practice, M407A2.
MIL-C-48354 - Cartridge, Ignition, Xm702E2 Loading, Assembling And Packing
This specification covers the loading, assembling and packing of the XM702E2, Ignition Cartridge for 60mm mortar ammunition.
MIL-C-48368 - Cartridge, He, 60Mm, M720 Loading, Assembling And Packing
This specification contains requirements and provides quality assurance provisions for loading, assembling and packing of a high explosive mortar cartridge designated as Cartridge 60MM, HE, M720.
MIL-C-48393 - Cartridge, Ignition, Xm702E2 Parts For
This specification covers parts for XM702E2, Ignition Cartridges for 60mm mortar ammunition.
MIL-C-48653 - Cartridge, Ignition, M702A1 Parts For
This specification covers the requirements and quality assurance provisions for the fabrication of parts and packing of parts for M702A1, Ignition Cartridge for the 60 MM Lightweight Company Mortar System.
MIL-C-48654 - Cartridge, Ignition, M702A1 Loading, Assembling And Packing
This specification contains requirements and provides quality assurance provisions quality assurance provisions for the loading, assembling and packing of the M702A1 Ignition Cartridge for the Light Weight Company Mortar System.
MIL-C-48697 - Cartridge 60Mm, Tp, M50A3 Loading, Assembling And Packing
This specification covers the requirements and quality assurance provisions for loading, assembling and packing of the Cartridge, 60mm, TP, M50A3.
MIL-C-48867 - Charge, Propelling, M204 Loading, Assembling And Packing (S/S By Mil-Dtl-32276)
This specification covers requirements and quality assurance provisions for the loading, assembling and packing for the Charge, Propelling, M204 used on the Lightweight Company Mortar System (LWCMS).
MIL-C-48868 - Charge, Propelling, M204 Parts And Container Assembly (S/S By Mil-Dtl-32274)
This specification covers requirements, quality assurance provisions, and packaging for the parts and container assembly for the propelling charge designated as Charge, Propelling, M204 manufactured by the slurry process and used on the Lightweight Company Mortar System (LWCMS).
MIL-C-50211 - Cartridge, 40Mm, White Star, Parachute, Xm583 And Cartridge, 40Mm, White Star, Cluster, Xm585 Metal Parts For
MIL-C-50212 - Cartridge Case Metal Parts Assembly, Xm195 Metal Parts For
MIL-C-50213 - Cartridge, 40Mm, White Star, Parachute, Xm583 Loading, Assembling And Packing
MIL-C-50214 - Cartridge, 40Mm, White Star, Cluster, Xm585 Loading, Assembling And Packing
MIL-C-50242 - Cartridge, 40Mm, He, M383, Body Assembly For Metal Parts
This specification covers the metal parts for one type of body assembly designated as Body Assembly for Cartridge, 40MM, HE, M383.
MIL-C-50243 - Cartridge, 40Mm, He, M383 Loading, Assembling And Packing
This specification covers the loading, assembling and packing for one type of cartridge designated as Cartridge, 40MM, HE, M383.
MIL-C-50446 - Case, Cartridge, 40Mm, M118 Parts For
This specification covers one type of case, cartridge designated as Case, Cartridge, 40MM, M118.
MIL-C-50447 - Case Cartridge, 40Mm, M118 And M195; Plug, Base For
This specification covers one type of base plug for use in Case Cartridge, 40MM, M118 and M195.
MIL-C-50448 - Case, Cartridge, 40Mm, M118 And M195, Cup, Power Charge For
This specification covers one type of Cup, Powder Charge for use in Case Cartridge, 40MM, M118 and M195.
MIL-C-50466 - Cartridge, 40Mm, He, Xm684 Loading, Assembling And Packing
This specification covers the loading, assembling and packing for one type of cartridge designated as Cartridge, 40MM, HE, XM684.
MIL-C-50510 - Cartridge, 40Mm, White Star, Parachute, Star, M583A1 Metal Parts For And Loading, Assembling And Packing (S/S By Mil-C-63092)
This specification covers the metal parts and loading, assembling and packing for one type of cartridge designated as Cartridge, 40MM, White Star, Parachute, M583A1.
MIL-C-50514 - Cartridge, 40Mm, Het, Xm677 Body Assembly For
MIL-C-50515 - Cartridge, 40Mm, Het, Xm677 Loading, Assembling And Packing
MIL-C-50517 - Cartridge, 40Mm, He, M397, Ogive For
MIL-C-50518 - Cartridge, 40Mm, He., M397, Skirt For
MIL-C-50527 - Case, Cartridge, 40Mm, Xm195, Part For
This specification covers the metal part for one type of cartridge case designated as Case, Cartridge, 40MM, XM195.
MIL-C-50543 - Cartridge, 40Mm, He, M386 Loading, Assembling And Packing
This specification covers the loading, assembling and packing for one type of cartridge designated as Cartridge, 40MM, HE, M386.
MIL-C-50712 - Case, Cartridge, 57Mm, M30A1B3
This specification covers Case, Cartridge, 57mm, M30A1B3.
MIL-C-50779 - Casing, Burster M158
This specification covers the requirements, quality assurance provisions, and packaging for the M158 Burster Casing for the 81MM Mortar WP round.
MIL-C-50861 - Cartridge, 40Mm, Hedp, M430; Body Assembly For Metal Parts
This specification covers the metal parts for one type of body assembly designated as Body Assembly for Cartridge, 40MM, HEDP, M430.
MIL-C-50862 - Cartridge, 40Mm, Hedp, M430; Liner For Metal Parts
This specification covers the metal part for one type of liner for Cartridge, 40MM, HEDP, M430.
MIL-C-50870 - Cartridge, 40Mm, Hedp, M433; Liner For Metal Part
This specification covers the metal part for one type of liner designated as Liner (One piece) for use in Cartridge, 40MM, HEDP, M433.
MIL-C-50871 - Cartridge, 40Mm, Hedp, M433; Projectile Metal Parts For
This specification covers, the metal parts for one type of cartridge designated as Cartridge, 40MM, HEDP, M433.
MIL-C-50874 - Cartridge, 40Mm, Canopy, Yellow Smoke Xm676, White Smoke Xm680, And Red Smoke Xm682 Loading, Assembling And Packing
MIL-C-50879 - Cartridges, 40Mm, Smoke Canopy: Xm676, Xm680 And Xm682 Metal Parts For
This specification covers the metal parts for Cartridges, 40MM, Smoke Canopy: XM676, XM680 and XM682.
MIL-C-51297 - Cartridge, 40Mm, Red Smoke, Rs, Xm675
This specification covers one type of training cartridge.
MIL-C-51351 - Cartridge, 35Mm, Riot Control, Cs, E23
MIL-C-51355 - Cartridge, 40Mm, Cs, M651
This specification covers one type of cartridge.
MIL-C-60303 - Cartridge, 40Mm: Riot Control, Cs, M674
This specification covers one type of riot control cartridge.
MIL-C-60317 - Cartridge, 60Mm, Smoke, Wp, M302A1 Assembling, Marking And Packing
This specification covers quality assurance provision for the requirements and assembling, marking and packing of the Cartridge, 60MM, Smoke, WP, M302A1.
MIL-C-60364 - Cartridge, 57Mm, He, M306A1, Loading, Assembling And Packing
This specification covers the loading, assembling and packing for one type of high explosive cartridge for use in 57MM rifles M18 and M18A1, designated as Cartridge, 57MM, HE, M306A1.
MIL-C-60368 - Cartridge, 57Mm, Tp, M306 Loading, Assembly And Packing
MIL-C-60452 - Cartridge Case Loading Assembly, M195 Loading, Assembling And Packing
This specification covers the loading, assembling and packing for one type of case, cartridge designated as CARTRIDGE CASE LOADING ASSEMBLY, M195 for use in various 40MM ammunition.
MIL-C-60552 - Cartridge, 40Mm, Multiple Projectile, Xm576 Loading, Assembling And Packing
This specification is the applicable detail specification for Cartridge, 40MM, Multiple Projectile, XM576 Loading, Assembling and Packing.
MIL-C-60610 - Case, Cartridge 40Mm, Xm199
This specification is the applicable detail specification for Cartridge Case, Base Plug and Propellant Cup 40MM, XM199.
MIL-C-60631 - Cartridge Case, Base Plug And Disc 40Mm, Xm199E1
This specification is the applicable detail specification for Cartridge Case and Base Plug, 40MM, XM199E1.
MIL-C-60632 - Cartridge, 40Mm, Xm576E1 Loading, Assembling And Packing
MIL-C-60941 - Cartridge, 40Mm, He, M384; Body Assembly For Metal Parts
This specification covers the metal parts for one type of body assembly designated as Body Assembly for Cartridge, 40MM, HE, M384.
MIL-C-60943 - Cartridge, 40Mm, He, M384 Loading, Assembling And Packing
This specification covers the loading, assembling and packing for one type of cartridge designated as Cartridge, 40mm, ,HE, M384.
MIL-C-60983 - Cartridge, 40Mm, He, M406 Loading, Assembling And Packing
This specification is approved for use by all Departments and Agencies of the Department of Defense.
MIL-C-60984 - Cartridge, 40Mm, He, M406; Ball And Skirt Assembly And Ogive For Metal Parts For
This specification covers the metal parts for the Ball and Skirt Assembly and Ogive for Cartridges, M406 and M381.
MIL-C-60985 - Case, Cartridge, 40Mm, M118 Metal Parts For
This specification covers the metal parts for one type of cartridge case designated as Cartridge Case Assembly, 40MM, M118.
MIL-C-60986 - Cartridge, 40Mm, Practice, M407A1 Loading, Assembling And Packing
This specification covers the loading, assembling and packing for one type of Cartridge designated as Cartridge, 40MM, Practice, M407A1.
MIL-C-60987 - Cartridge, 40Mm, Practice, M407A1, Ball And Skirt Assembly And Ogive For Metal Parts For
This specification covers the metal parts for the Ball and Skirt Assembly and Ogive for the M407A1 Cartridge.
MIL-C-63062 - Case, Cartridge, 40Mm, M169, Cup, Closing For
This specification covers one type of Cup, Closing for use in Case Cartridge, 40MM, M169.
MIL-C-63063 - Case, Cartridge, 40Mm, M169; Plug, Base For
This specification covers one type of base plug for use in Case Cartridge 40MM, M169.
MIL-C-63091 - Cartridge, 40Mm, Green Star, Parachute, M661 Metal Parts And Loading, Assembling And Packing (S/S By Mil-C-63092)
This specification covers the metal parts and loading, assembling and packing for one type of cartridge designated as Cartridge, 40MM, Green, Star, Parachute, M661.
MIL-C-63113 - Cartridge, 40Mm, Yellow Smoke, Canopy, M676 Metal Parts For And Loading, Assembling And Packing
This specification contains requirements not normally covered by the drawings and provides quality assurance provisions for the fabrication of parts and loading, assembling and packing for Cartridge, 40MM, Yellow Smoke, Canopy, M676.
MIL-C-63114 - Cartridge, 40Mm, White Smoke, Canopy, M680 Metal Parts For And Loading, Assembling And Packing
This specification contains requirements not normally covered by the drawings and provides quality assurance provisions for the fabrication of parts and loading, assembling and packing for Cartridge, 40MM, White Smoke, Canopy, M680.
MIL-C-63115 - Cartridge, 40Mm, Red Smoke, Canopy, M682 Metal Parts For And Loading, Assembling And Packing
This specification contains requirements not normally covered by the drawings and provides quality assurance provisions for the fabrication of parts and loading, assembling and packing for Cartridge, 40MM, Red Smoke, Canopy, M682.
MIL-C-63127 - Cartridges: 40Mm, Ground, Smoke Markers, 40Mm, M713, M715 And M716, Base Parts For
This specification contains requirements not normally covered by the drawings and provides quality assurance provisions for the fabrication of parts and packing for one type of Base for Cartridges: 40MM, Ground Smoke Markers.
MIL-C-63128 - Cartridges: 40Mm, Ground Smoke Markers, M713, M715 And M716; Body Part For
This specification contains requirements not normally covered by the drawings and provides quality assurance provisions for the fabrication of one type of Body for Cartridges: 40MM, Ground Smoke Markers, M713, M715 and M716.
MIL-C-63129 - Cartridge, 40Mm, Red Smoke, Ground Marker, M713 Loading, Assembling And Packing
This specification covers requirements, quality assurance provisions, packaging, the fabrication, manufacture of one type of cartridge designated as Cartridge, 40mm, Red Smoke, Ground marker, M713.
MIL-C-63130 - Cartridge, 40Mm, Green Smoke, Ground Marker, M715 Loading, Assembling And Packing
This specification covers requirements, quality assurance provisions, packaging, the fabrication, manufacture of one type of cartridge designated as Cartridge, 40mm, Green Smoke, Ground Marker, M715.
MIL-C-63131 - Cartridge, 40Mm, Yellow Smoke, Ground Marker, M716 Loading, Assembling And Packing
This specification covers requirements, quality assurance provisions, packaging, the fabrication, manufacture of one type of cartridge designated as Cartridge, 40mm, Yellow Smoke, Ground Marker, M716.
MIL-C-63240 - Case, Cartridge, Practice, Xm212 (S/S By Mil-C-63239)
This specification contains requirements not normally covered by the drawings and provides quality assurance provisions for the fabrication of parts, assembly and packing of one type of case cartridge designated as Case, Cartridge, Practice, M212.
MIL-C-63522 - Charge, Propelling, M204, Paper Preform Process Parts And Container Assembly
MIL-C-70501 - Charge, Propelling, M204, Paper Preform Process Parts And Container Assembly
This specification covers requirements, quality assurance provisions and packaging for the parts and container assembly manufactured by the paper preform process for the propelling charge designated as Charge, Propelling, M204 and used on the ammunition for the Lightweight Company Mortar System (LWCMS).
MIL-C-70614 - Cartridge, 60Mm, Smoke, Wp, M302A2 Assembling, Marking And Packing
MIL-C-70714 - Cartridge, 60Mm, Illuminating, Xm721 Loading, Assembling, And Packing
This Specification covers requirements and quality assurance provisions for the loading, assembling, and packing for one type of mortar cartridge designated as Cartridge, 60MM, Illuminating, XM721.
MIL-C-71178 - Cartridge, 40Mm, High Velocity, Dummy, M922A1 Metal Part For
This specification covers the requirements, examinations and tests for the metal part for one type of cartridge designated as Cartridge, 40mm Dummy, M922A1 (see 6.1).
MIL-D-50478 - Dummy Projectile, 40Mm; Pxr 6135 For Cartridge Case Loading Assembly, Xm195 Parts For
This specification covers the parts for one type of projectile designated as DUMMY PROJECTILE, 40MM, PXR 6135 for use in acceptance of Cartridge Case, Loading Assembly, XM195.
MIL-D-70484 - Display Unit, For Rocket Management Subsystem M138
This specification covers requirements, quality assurance provisions, and preparation for delivery for Display Unit, for Rocket Management Subsystem, M138.
MIL-DTL-12235 - Projectile, Plate-Proofing (For Impact Or Shock Testing) 37Mm M1000, 57Mm M1001, 75Mm M1002, 90Mm M1003, 105Mm M1004, 20Mm M1005, 57Mm M1001A, And 75Mm M1002A
This specification covers plate-proofing projectiles made from steel and aluminum bar stock for use in impacting or shock-testing armor, armor weldments, and other armor structures (see 6.1).
MIL-DTL-45585 - Link, Cartridge - Metallic Belt, 40 Millimeter - M16A2
This specification covers one type of link designated as Link, Cartridge - Metallic Belt, 40 Millimeter - M16A2 hereafter referred to as the link.
MIL-DTL-48400 - Projectile, 60Mm, He, M720/M888 Metal Parts Assembly
This specification covers Projectile, 60MM, HE M720 Metal Parts Assembly.
MIL-DTL-48401 - Ring, Obturating For 60Mm Mortar
This specification covers the requirements, examinations and tests for the obturating ring for use on the 60mm mortar cartridges.
MIL-DTL-48425 - Fin Assembly - M24
This specification covers Fin Assembly, M24, for use on 81MM Mortar Ammunition.
MIL-DTL-48580 - Fin, M27
This specification covers requirements, examinations and tests for the fabrication of the M27 Fin.
MIL-DTL-48683 - Cartridge, 40 Millimeter, Projectile Assembly, Tp - M918 Loading, Assembling, And Packing
This specification covers the metal parts and loading, assembling and packaging for Cartridge, 40 Millimeter, Projectile Assembly, TP - M918.
MIL-DTL-48684 - Cartridge, 40 Millimeter, M918 Tp Loading, Assembling, And Packing
This specification covers the metal parts and loading, assembling and packing for one type of cartridge designated as Cartridge, 40 Millimeter, M918 TP.
MIL-DTL-50509 - Cartridge, 40 Millimeter, White Star Cluster - M585 Loading, Assembling, And Packing
This specification covers the components and loading, and assembling for one type of cartridge designated as Cartridge 40MM, White Star, Cluster M585.
MIL-DTL-50863 - Cartridge, 40 Millimeter, Hedp - M430A1 Loading, Assembling, And Packing
This specification covers the metal parts, loading, assembling, and packing for one type of 40MM, High-Explosive, Dual-Purpose (HEDP) cartridge, designated Cartridge, 40 Millimeter, HEDP - M430A1.
MIL-DTL-50872 - Cartridge, 40 Millimeter, Hedp - M433 Loading, Assembling, And Packing
This specification covers the components, assemblies, loading and assembling for one type of 40MM, high-explosive, dual-purpose (HEDP) cartridge, here after referred to as Cartridge, 40 Millimeter: HEDP, M433.
MIL-DTL-60944 - Cartridge, 40 Millimeter, Practice - M385A1 Loading, Assembling, And Packing
This specification covers the metal parts and loading, assembling and packing for one type of cartridge designated as Cartridge, 40 Millimeter - Practice - M385A1.
MIL-DTL-60945 - Cartridge, 40 Millimeter, Projectile Assembly, Practice - M385A1
This specification covers the requirements, examinations and tests for the Cartridge, 40 Millimeter - Projectile Assembly, Practice - M385A1.
MIL-DTL-60982 - Case Cartridge, 40 Millimeter - M169 Loading, Assembling, Packing
This specification contains one type of case cartridge designated as Case, Cartridge, 40 Millimeter - M169.
MIL-DTL-63092 - Cartridges, 40 Millimeter, Parachutes, Loading, Assembling, And Packing
This specification covers the components, loading and assembling for four cartridges with different color illuminants designated as Cartridge, 40MM, White Star Parachute, M583A1; Green Star, Parachute, M661; Red Star, Parachute, M662, and Infrared (IR) Illuminant, M992. Four (4) different types of flares are represented in this specification.
MIL-DTL-63133 - Case Cartridge, 40 Millimeter - M118 And M195 Loading, Assembling, Packing
This specification covers the components, assembly, and loading of the 40 mm cartridge cases, M118 and M195, for use in low velocity 40 mm cartridges.
MIL-DTL-63239 - Cartridge, 40 Millimeter, Practice - M781 Loading, Assembling, And Packing
This specification covers the components, loading, assembling, and packing for one type of cartridge designated as Cartridge, 40MM: Practice M781.
MIL-DTL-64037 - Cartridge, High Explosive, 60Mm, M888 With Fuze M935
This specification covers the requirements, examinations and tests of the 60mm, high explosive (HE) cartridges designated as M888 with Fuze M935.
MIL-DTL-70677 - Burster, Projectile - M85 Loading, Assembling And Packing
This specification covers the loading, assembling and packing for one type of burster designated as Burster, Projectile - M85.
MIL-DTL-70678 - Case, Projectile Burster - M216
This specification covers the requirements for the fabrication of the CASE, PROJECTILE BURSTER: M216 for the CARTRIDGE, 60 MILLIMETER: white phosphorous, M722A1.
MIL-DTL-70679 - Projectile, 60 Millimeter, Smoke, Marking - M722A1 Body Assembly
This specification covers Projectile, 60MM, White Phosphorous, Smoke, M722A1 Body Assembly.
MIL-E-14776 - Extension, Fin
This specification covers the metal parts for one type of fin extension for use with 60MM Mortar Cartridges designated as Extension, Fin.-
MIL-F-14902 - Fin, Assembly, 60Mm, M2
This specification covers one type of fin assembly for 60MM mortar ammunition designated as Fin, Assembly, 60MM, M2.
MIL-F-48402 - Fin Xm25
MIL-F-51352 - Fuze Cloth
This specification covers one type of fuze cloth.
MIL-F-71131 - Fin, Mortar Cartridge: M32
This specification covers requirements and quality assurance provisions for the fabrication of the Fin, Mortar Cartridge: M32. This is a pressure vessel application.
MIL-G-1386 - Cartridge, Tp, M306, For 57&Mm Rifle, Cartridge, Tp, 309, For 75 Mm, Assembling, Marking, And Packing
MIL-L-20401 - Loading Base Fuzed Shell With Explosive D, Assembling And Packing
MIL-L-51350 - Launcher And Cartridge, Chemical Agent, Tactical, Cs, Portable, E8
MIL-L-60369 - Liner, For Case, Cartridge, 57Mm, M30A1B1
This specification covers the liner for Case, Cartridge 57MM, M30A1B1 used in recoilless rifle ammunition.
MIL-M-48037 - Modified M406, Ball Assembly For Metal Parts
MIL-O-70483 - Operation Unit, For Rocket Management Subsystem, M138
This specification covers requirements, quality assurance provisions, and preparation for delivery for Operations Unit, for Rocket Management Subsystem, M138.
MIL-P-11633 - Projectile, 60-Millimeter, Mortar, M302A1; Wp Filling Assembly
This specification covers the white phosphorus (WP) filling and assembly of M302A1 projectile, without explosive components.
MIL-P-11635 - Projectile, 57 Mm, Smoke, Wp, M308A1, Filling Assembly
This specification covers the white phosphorus (WP) filling and assembly of the M308A1 projectile, without explosive components.
MIL-P-14785 - Projectile, 60Mm Metal Parts Assembly
This specification covers Projectile, Metal Parts Assembly for Cartridge, 60MM, HE, M9A3 and M49A4.
MIL-P-14827 - Projectile, 57Mm, He, M306A1, Metal Parts Assembly
This specification covers Projectile, 57MM, HE, M306A1, Metal Parts Assembly.
MIL-P-14835 - Projectile, Smoke, Wp, 57Mm: M308A1, Metal Parts Assembly
MIL-P-14863 - Projectile, 60Mm, H.E., M49A3 Metal Parts Assembly (Ductile Iron)
MIL-P-18973 - Projectile, Minor Caliber
MIL-P-20368 - Projectile, Target-Practice, Cast Iron
MIL-P-20460 - Projectiles, Armor-Piercing, Metal Parts Assembly
MIL-P-20519 - Projectiles, Armor-Piercing, Capped, Metal-Parts Assembly.
MIL-P-2996 - Projector, Signal Ground, M4
MIL-P-46648 - Projectile He, 37Mm, M63 Metal Parts Assembly
MIL-P-48071 - Cartridge, 40Mm, Practice, M385 & Cartridge, 40Mm, High Velocity, Dummy (S/S By Mil-C-60945)
MIL-P-50203 - Projectile Metal Parts, Less Ball Assembly, With Fuze, Pd, M536
This specification covers the Projectile Metal Parts: Less Ball Assembly; with Fuze, PD, M536.
MIL-P-50357 - Projectile, 60Mm, H.E., M49A3 Metal Parts Assembly (Alloy Steel)
This specification covers Projectile, 60MM, H.E., M49A3 Metal Parts Assembly (Alloy Steel).
MIL-P-51474 - Projectile, 64Mm, Riot Control, Ke M743
This specification covers requirements, quality assurance provisions and packaging for M743 projectile, selected components, and the M743, 64 MM projectile assembled together with the M755 blank cartridge in a carrier assembly.
MIL-P-60335 - Projectile, 60Mm, Illuminating M83A3 Parts, Loading, Assembling And Packing
This specification covers the loading, assembling and packing for one type of mortar projectile designated as Projectile, 60MM, Illuminating, M83A3.
MIL-P-60600 - Projectile, 40Mm, Xm577
This specification is the applicable detail specification for Projectile, 40mm, XM577.
MIL-P-60605 - Projectile, 60Mm, He, M49A2 Metal Parts Assembly (Carbon Steel)
This specification covers Projectile 60MM, H. E., M49A2 Metal Parts Assembly (Carbon Steel).
MIL-P-60633 - Projectile, 40Mm, Xm577E1
MIL-P-64036 - Projectile, 60Mm, Smoke, Wp, M302 Metal Parts Assembly
This specification covers requirements and quality assurance provisions for the fabrication of parts, assemblies and packing of projectile assembly, 60MM, Smoke, WP, M302.
MIL-P-70449 - Power Module Assembly For Test Set, Electronic System: M137
This specification covers requirements, quality assurance provisions, and preparation for delivery for Power Module Assembly: used on Test Set, Electronics System: M137.
MIL-P-70715 - Projectile, 60Mm Illuminating, Xm721, (M721) Metal Parts For
MIL-PRF-82537 - Case, Cartridge, Steel, Spiral Wrapped 40 Millimeter (Mm) And Larger Calibers, General Specification For
This specification covers the general requirements for spiral-wrapped steel cartridge cases, 40 millimeter (mm) and larger. Specific requirements for a particular caliber, Mark and Mod spiral-wrapped cartridge are covered by the appicable detail specifications.
MIL-R-20358 - Round, Complete, Canister, M2, For Guns, 37 Mm., M3, M5, And M6, Assembling, Marking, And Packing.
MIL-R-70503 - Rocket Management Subsystem M138
This specification covers requirements, quality assurance provisions, and preparation for delivery for Rocket Management Subsystem. M138.
MIL-S-10363 - Shell, Fixed, He, At-T, M66, For 75-Mm., Howitzers, Assembling, Marking And Packing.
MIL-S-11778 - Shell, Mortar, T54, 105Mm, Wp, Loading Assembly
MIL-S-12523 - Shell, Heat, Metal Parts For Fin Stablized Rounds
MIL-S-1392 - Shell, Fixed, He-T, Sd, M54A1, For 37-Mm Guns, Loading, Assembling, And Packing
MIL-S-1393 - Shell, Fixed He, M63 For 37-Mm Guns Tp, M63 Mod1 For 37-Mm Guns Tp, M92 For 37-Mm Guns Assembling, Marking, And Packing.
MIL-S-1436 - Shell, He, M49, For 60Mm Mortar,Practice, M50 For 60Mm Smoke, M302, For 60Mm, He, M43, For 81Mm, Practice, M43 For 81Mm, Chemical, M57, For 81Mm Mortar Assebling & Marking
MIL-S-14832 - Sabot, Cap Seal And Caps For 40Mm, Xm576E2 (No S/S Dcoument)
MIL-S-20391 - Shell, Tp-T, M55A1, F/37Mm Guns, M1A2 & An-M9 Shell, Tp-T, M55A1, F/37Mm Guns, An-M4 & M10 Shot, Apc-T, M51,F/37Mm Guns, M3 & M6 Shot, Apc-T M59A1 F/37Mm Guns, M1A2 & An-M9 Shot, Ap74 Guns, M3 & M6 Shot, Ap-T M80 F/37Mm
MIL-S-20428 - Shell, Steel, Manufactured From Bar Stock
MIL-S-20574 - Shell, H.E., At., 75 Mm., M66 Metal Parts For.
MIL-S-20603 - Shot, Target Practice, 37 Mm., M51, Metal Parts Assembly
MIL-S-3973 - Shell, Illuminating, M83A3, For 60-Mm Mortars, Body And Loading Assembly, Assembling, Marking And Packing
MIL-T-70431 - Test Set, Electronic System: M137
This specification covers requirements, quality assurance provisions, and preparation for delivery for Test Set, Electronics System: M137.
for one type of mortar cartridge designated as Cartridge, HE, 120MM, M934.MIL-C-71045 - Container, Metal Shipping And Storage, Cartridge, 120Mm Mortar, Pa154, General Specification For (S/S By Mil-Dtl-32320)
This specification covers the general requirements for Container, Metal Shipping and Storage, Cartridge, 120mm Mortar, PA154, hereinafter called the container. The container is used for holding ammunition during usage, shipping and storage.
MIL-C-71057 - Cartridge, Smoke, Xm929 With Fuze M745 Loading, Assembling And Packing
This specification establishes the requirements, and quality assurance provisions for the manufacture and acceptance of one type of mortar cartridge designated as Cartridge, Smoke, XM929, for use in the 120mm Mortar.
MIL-C-71128 - Cartridge, 81Mm, Practice, Short Range M880 Loading, Assembling And Packing
This specification covers the Loading Assembling and Packing for one type of practice mortar cartridge designated as Cartridge, 81mm Practice, Short Range, M880.
MIL-C-71133 - Cartridge, Ignition, M985 Loading, Assembling And Packing
This specification covers requirements and quality assurance provisions for the loading, assembling and packing for the Cartridge, Ignition M985 for use on the Cartridge, 81MM: Practice Short Range, M880.
MIL-C-71134 - Cartridge, He, 120Mm, M933 W/Fuze M745 Loading, Assembling And Packing
This specification establishes the requirements and quality provisions for loading, assembling and packing for one type of mortar cartridge designated as Cartridge, HE, 120MM, M933.
MIL-C-71144 - Charge, Propelling, M229, For 105Mm Howitzer Loading, Assembling And Packing
This specification covers the requirements, examinations and tests for the loading, assembling and packing for one type of propelling charge designated as Charge, Propelling, M229, for Howitzer M119 and is intended for use in the M913 RA cartridge.
MIL-C-71145 - Case, Cartridge, 105Mm W/Charge M67/M200 And Primer M28B2
This specification covers the requirements, examinations and tests for assembly and packing of the Case Cartridge, Primer and Propelling Charge.
MIL-C-71150 - Cartridge, 60Mm Practice, Short Range, M766 Loading, Assembling And Packaging
This specification covers the Loading Assembling and Packing for one type of practice mortar cartridge designated as Cartridge, 60mm Practice, Short Range, M766.
MIL-C-71155 - Cartridge, Ignition, M987 Loading, Assembling And Packing
This specification covers requirements and quality assurance provisions for the loading, assembling and packing for the Cartridge, Ignition M987 for use on the Cartridge, 81MM; Practice, Short Range, M766.
MIL-C-71189 - Cartridge, 81Mm, Infrared Illuminating, Xm816, Loading, Assembling, And Packing
This specification covers requirements and quality assurance provisions for the loading, assembling and packing for one type of mortar cartridge designated as Cartridge, 81MM, Infrared Illuminating, XM816.
MIL-DTL-14852 - Projectile, 105Mm, Illuminating, M314A3 And Projectile, 105Mm, Infrared Illuminating, M1064 Metal Parts Assembly
This specification covers the metal parts assembly used in two types of 105MM illuminating projectiles.
MIL-DTL-14997 - Projectile, 105Mm, Illuminating, M314A3 And Projectile, 105Mm, Infrared Illuminating, M1064 Loading Accessories
This specification covers the loading accessories used in two types of 105MM illuminating projectiles.
MIL-DTL-20354 - Cartridge, 105Mm, Illuminating, M314A3 Illuminating And Cartridge, 105Mm, M1064 Infrared Illuminating Loading, Assembling And Packing
This specification covers the requirements of loading, assembling, and packing of two types of 105MM illuminating cartridges.
MIL-DTL-45195 - Cartridge, 105Mm, He, M1 Loading, Assembling And Packing
This specification covers the requirements, examinations and tests for the loading, assembling and packing of Projectile, 105MM, HE, M1 for use with the 105MM Howitzer M101, M102 and M119(see 6.1), M2A1, M2A2, M103, and M137 with TNT, composition B or IMX-101.
MIL-DTL-46229 - Cartridge, 105Mm Blank, M395 Loading, Assembling And Packing
This specification covers the loading, assembling, and packing for one type of cartridge designated as Cartridge, 105MM, Blank, M395 for Howitzers.
MIL-DTL-48360 - Charge, Propelling, M200, For 105Mm Howitzer, M119 Loading, Assembling And Packing
This specification covers the loading, assembling and packing for one type of Propelling Charge designated as M200 for the M119 Howitzer.
MIL-DTL-48635 - Cartridge, 81Mm, Practice - M879 W/Fuze, Practice - M751 Loading, Assembling And Packing
This specification covers the requirements of the loading, assembling, packing of the Cartridge, 81mm Practice - M879.
MIL-DTL-48636 - Body, Painted 81Mm For Cartridge: Practice - M879
This specification covers the requirements, examinations and tests for Body, Painted 81MM for Cartridge: Practice ?√ M879.
MIL-DTL-60315 - Charge, Propelling, M67, For 105Mm Howitzer Loading, Assembling And Packing
This specification covers the loading, assembling and packing for one type of propelling charge designated as Charge, Propelling, M67, for Howitzer, M2A2, M103, M137 and M20A2 cannons.
MIL-DTL-60547 - Projectile, 105Mm, He, M1 And M760 Metal Parts Assembly
This specification contains requirements not covered by the drawings for the fabrication and assembling of metal parts of 105MM, HE, M1 Body, M1 High Fragmentation (HF-1) and M760, as applicable. (see 6.1).
MIL-DTL-70526 - Projectile, 105 Millimeter, He, Ra- M913/M927, Delay Assembly For
This specification contains requirements and quality assurance provisions for the fabrication and packaging of parts and assembly of the delay assembly for the 105MM, High Explosive, Rocket Assisted, M913 / M927 Projectiles.
MIL-DTL-70545 - Charge, Propelling, M218/M219/M220 Loading, Assembling And Packing
This specification covers requirements of the loading, assembling and packing for the Charge, Propelling, M218/M219/M220 used on the Cartridge, 81mm; Smoke, RP, M819; Illuminating, M853A1/M816; Training, M879/M879A1 and HE, M821A2/M889A1/M889A2.
MIL-DTL-70546 - Fin Assemblies, Mortar Cartridge, 81 Millimeter - M28 And M29
This specification covers requirements, examinations and tests for the Fin Assemblies M28 and M29 for use on 81MM Mortar Ammunition.
MIL-DTL-70548 - Obturating Ring For 81Mm Mortar
This specification covers the requirements, examinations and tests for the obturating ring for use on the 81mm mortar cartridges.
MIL-DTL-70549 - Cartridge, 81Mm: Smoke, Red Phosphorus M819 With Fuze Mtsq, M772 Loading, Assembling, Packing And Parts For
This specification covers the requirements of the loading, assembling, packing and parts for one type of mortar cartridge designated as 81mm Smoke, Red Phosphorus M819, with Fuze MTSQ M772 for use in the M252 Improved 81MM Mortar System is hereafter referred to as the M819.
MIL-DTL-70551 - Cartridge, 81 Millimeter, Smoke, Rp - M819 Projectile, Mortar, Metal Parts For
This specification covers the requirements, examinations and tests for the body tube assembly, body tube, tail cone assembly, tail cone, adapter, rear support disc, and retaining pins used on the mortar cartridge, 81mm smoke, red phosphorus (RP), M819.
MIL-DTL-71037 - Fin Assembly, Mortar Cartridge, 120 Millimeter - M31
This specification covers requirements, examinations and tests for the fabrication of one type of fin assembly designated as Fin Assembly, M31 for use on 120MM Mortar Ammunition.
MIL-DTL-71038 - Projectile, 120Mm, He, M933A1/M934A1/M934A2 Body
This specification establishes the requirements and quality assurance provisions for the manufacture and acceptance of one type of projectile body designated as Body Projectile for HE, M933A1/M934A1/M934A2 cartridges for use in the 120MM Mortar.
MIL-DTL-71055 - Body Assembly For Cartridge, 120Mm Smoke, Wp - M929
This specification covers the requirements, examinations and tests for the body and body assembly for the cartridge, 120mm smoke, WP - M929.
MIL-F-11630 - Filling, Method Of, White Phosphorus (Wp) 105Mm, Smoke Shell, M325
MIL-F-11679 - Filling, Method Of, White Phosphorous, Wp, 75-Mm, Smoke Shell, M64
MIL-F-12417 - Filling, Method Of, White Phosphorous (Wp) Shell, Chemical, M104, For 155-Mm Guns.
MIL-F-12476 - Filling, Method Of, H, Shell, Chemical, 4.2-Inch, M2, M2 Alternate, M2A1, And M2A1 Alternate
MIL-F-13854 - Forgings For Common Steel Shell
MIL-F-14888 - Fin Assembly, Xm170
This specification covers Fin Assembly, M170, for use on 81MM Mortar Ammunition.
MIL-F-20500 - Fin, Steel, For Smooth Bore Mortar Shell
MIL-F-48076 - Fin, Assembly, M158
This specification contains requirements and provides quality assurance provisions for the Fin Assembly, M158 for use on 81MM Mortar Ammunition.
MIL-F-48167 - Flechette, Eight Grain
This specification covers one type of flechette designated as Flechette, Eight Grain.
MIL-F-48168 - Flechette, Thirteen Grain
This specification covers one type of flechette designated as Flechette, Thirteen Grain.
MIL-F-60613 - Fin Assembly, M4A1
This specification covers Fin Assembly, M4A1.
MIL-F-60843 - Fin, Assembly, M141
MIL-F-60844 - Fin Assembly M149
MIL-H-46906 - Holders, Increment M1A1, M2A1 And M3 Parts For
This specification covers Holder, Increment M1A1 for use with 60MM Mortar Ammunition and M2A1 and M3 for use with 81MM Mortar Ammunition.
MIL-H-48085 - Holder, Propellant For 4.2 Inch Ammunition
This specification contains requirements not covered by the drawings and provides quality assurance provisions for the fabrication of parts and packing for one type of propellant holder for the 4.2 Inch Mortar.
MIL-I-10557 - Increments, Propellant M1A1, M2A1 And M3A1 (Made From Propellant, M8)(S/S By Mil-I-14961)
MIL-I-10638 - Illuminant Assembly For 81Mm, M301, Illuminating Shell
MIL-I-3848 - Indicator, Propellant Temperature, M13, M15 And M33 (Less Propellant)
This specification covers three types of propellant temperature indicators for use in indicating the temperature of the propellant in 75MM, 90 MM, and 120 MM ammunition (see 6.1).
MIL-I-45170 - Increments, Propellant M5, T8 And T9
This specification covers propellant increments for use in mortar ammunition.
MIL-I-46414 - Initiator, Burster, T7,(M13) Loading, Assembling And Packing
This specification covers the parts, loading, assembling and packing for one type of burster initiator designated as Burster Initiator, M13 for use in smoke cartridges for 4.2 inch mortars.
MIL-I-60347 - Igniter Assembly For Cartridges, 90Mm, Ap-T, M318A1 And 90Mm, Tp-T, M353E1
This specification covers the loading, assembly, and packing of the igniter assembly for Cartridges, 90MM, AP-T, M318A1 and 90MM, TP-T, M353E1.
MIL-K-71129 - Kit, Refurbishment, For Cartridge, 81Mm, Practice, Short Range, M880 Loading, Assembling And Packing
This specification covers the loading, assembling and packing for the refurbishment kit for Cartridge, 81MM Practice, Short Range, M880.
MIL-K-71151 - Kit, Refurbishment, For Cartridge, 60Mm, Practice, Short Range, M766 Loading, Assembling And Packing
This specification covers the loading, assembling and packing for the refurbishment kit for Cartridge, 60MM Practice, Short Range, M766.
MIL-L-14913 - Laminate, Paper And Cloth, (For Use With Ammunition)
MIL-L-46959 - Lucky Assembly, Insulated, For Cartridges 105Mm, Heat-T, M456A1 And 90Mm, Heat-T, M431A2 Parts For, Assembling And Packing
This specification contains requirements not covered by the drawings and provides quality assurance provisions for the manufacture of parts for, assembling and packing for one type of insulated lucky assembly for use in Crtgs, 105mm, Heat-T, M456a1 and 90mm, heat-t, M431A2.
MIL-L-50470 - Liner For Deep Cavity Loaded Projectile
This specification covers the liner, for deep cavity loaded projectiles.
MIL-L-60024 - Lucky Assembly, For Cartridge 90Mm, Heat, (M371A1) And 106Mm, Heat, M344A1 Parts For Assembling And Packing
This specifications covers the parts for, assembling and packing of the lucky assembly for use in Cartridges, 90MM, HEAT, M371E1 and 106MM, HEAT, M344A1.
MIL-L-60038 - Liner Assembly, M6
This specification covers the Liner Assembly M6 for Case Cartridge, 106M/M, M94B1, Assembly.
MIL-L-60339 - Liner Assembly Outer, For Cartridge 106Mm, M346A1
This specification covers the liner assembly for Cartridge, 106MM, M346A1.
MIL-N-48153 - Nose Lucky And Insulator Assembly For Cartridge 105Mm, Heat-T, M456A1E1 Parts For, Assembly And Packing
This specification covers the parts for assembling and packing for one type of Nose Lucky and Insulator Assembly for use with Cartridge, 105MM, HEAT-T, M456A1E1.
MIL-O-14726 - Obturating Ring (Stamped), For Cartridges, 81Mm, Wp, M375E3 And He, M374E3
MIL-O-46910 - Obturating Mechanism, Parts For
This specification contains requirements not covered by the drawings and provides quality assurance provisions for the fabrication of parts and packing of one type of obturating mechanism for the 4.2 Inch Mortar.
MIL-O-71039 - Obturating Band, Plastic Split (Molded)
This specification establishes the requirements and quality assurance provisions for the manufacture and acceptance of one type of Obturating Band, Plastic, Split (molded) for use on the 120mm Mortar, Smoke, M929; Illuminating, M930; and HE, M933/M934 Cartridges.??
MIL-P-10590 - Projectile, Illuminating, 81Mm, M301A2 Metal Parts Assembly
This specification covers Projectile, Illuminating, 81mm, M301A2, Metal Parts Assembly.
MIL-P-11678 - Projectile, 90-Mm, Smoke, Wp, M313; Filling And Assembly
MIL-P-12741 - Projectile, 4.2 Inch Illuminating, M335 And M335E1 Metal Parts, For
MIL-P-12764 - Projectile, 4.2 Inch, Illuminating, M335A2 Loading, Assembling And Packing
This specification contains requirements not covered by the drawings and provides quality assurance provisions for the loading, assembling and packing of one type of projectile designated as Projectile, 4.2 Inch, Illuminating, M335A2.
MIL-P-12815 - Power Source, Piezoid (Lucky)
The specification contains requirements not covered by the drawings and provides quality assurance provisions for the fabrication of parts, assembly and packing for flat type polarized polycrystalline ceramic piezo-electric elements designated as Power Source, Piezoid (Lucky).
MIL-P-13041 - Projectile, 4.2 Inch, Smoke, M328A1, Wp Filling
This specification covers the white phosphorus (WP) filling and assembly of the M328A1 projectile, without fuzing components.
MIL-P-13197 - Projectile, 81Mm, Illuminating, M301A2 Loading, Assembling And Packing
MIL-P-13715 - Plugs,Closing For Propelling Charges
MIL-P-14782 - Paper, Aromatic Nylon Calendered, (For Use With Ammunition)
MIL-P-14829 - Projectile, 4.2 Inch Tactical Cs, Xm633 Metal Parts Assembly
This specification covers Projectile, 4.2 Inch, Tactical CS, XM633 Metal Parts Assembly.
MIL-P-14830 - Projectile, 81Mm, H.E., M374A1 Metal Parts Assembly (Alloy Steel)
This specification covers Projectile, 81MM, H.E., M374A1 Metal Parts Assembly (Alloy Steel).
MIL-P-14839 - Projectile, 105Mm, Smoke, Be, M84E1 Metal Parts Assembly
This specification covers Projectile, 105MM: SMOKE, BE, M84E1, Metal Parts Assembly.
MIL-P-14840 - Projectile, 105Mm Tactical, Cs, Xm632 Metal Parts Assembly
MIL-P-14901 - Projectile, 4.2 Inch: Tactical Cs, Xm633 Loading, Assembling And Packing (For Cartridge, Tactical Cs, Xm630)
This specification covers the loading, assembling and packing for one type of projectile designated as Projectile, 4.2 Inch: Tactical CS, XM633.
MIL-P-20499 - Plug, Adapter Closing
MIL-P-20555 - Powder, Flashless, (For 90 Mm Gun)
MIL-P-20601 - Projectile, Smoke, Wp, T16E1 For 120Mm Gun, M58, And Projectile, Smoke Wp-T, M357 For 120Mm Gun, M58, Assembling, Marking And Packing
MIL-P-21356 - Projectile Load, Illuminating Mk 12 Mod 0 (For 3 Inch /50 Projectile)
MIL-P-45416 - Plug, Closing, 120Mm, M8
MIL-P-46438 - Plug, Closing, For Artillery And Mortar Projectiles
This specification covers the closing plug for use in Artillery and Mortar projectiles.
MIL-P-46490 - Projectile, Heat-Fs, 90Mm, M431E1, Metal Parts Assembly
MIL-P-46502 - Projectile Body, Metal Parts Assembly For Cartridge, He, 81Mm M362A1
MIL-P-46512 - Projectile For Cartridge, 81-Millimeter Mortar, Smoke, M370; Wp Filling Assembly
This specification covers the filling of an 81-millimeter smoke projectile with white phosphorus (WP).
MIL-P-46527 - Projectile, Body, Smoke, Wp, 81Mm, M370, Metal Parts Assembly
MIL-P-46541 - Projectile For Cartridge, 105-Millimeter, M360, Gb-Filled, Without Fuze And Burster
This specification covers the projectile for cartridge M360 filled with CB (for the 105-mm howitzer) without explosive components.
MIL-P-46925 - Projectile, 120Mm, He-T, M356, W/Fuze, Pd M557, For, 120Mm Gun, Loading, Assembly And Packing
MIL-P-46929 - Plug, Closing, 120Mm, M6
MIL-P-48241 - Plug, Closing 105Mm
This specification covers one type of plastic closing plug for 105MM Howitzer cartridge.
MIL-P-48446 - Penetrator, Code And Nose Components For Projectile, 105Mm, Apds-T, M392A1
This specification covers components made of high density tungsten for use as penetrators on 105MM kinetic energy tank ammunition. This specification is intended to be a supplement to MIL-P-50370 and components made to this specification shall also comply with the requirements contained in MIL-P-50370 and applicable drawings.
MIL-P-48495 - Projectile, Heat-T, 76Mm, M495 Metal Parts Assembly
MIL-P-50308 - Projectile, Heat, 106Mm, M344A1 With Fin M8 Metal Parts Assembly
This specification is the applicable detail specification for Projectile HEAT, 106MM, M344A1 with Fin M8, Metal Parts Assembly.
MIL-P-50649 - Projectile, 81Mm, H.E., M374A1 Metal Parts Assembly (Pearlitic Malleable Iron)
This specification covers Projectile, 81MM, H. E. , M374A1 Metal Parts Assembly (Pearlitic Malleable Iron).
MIL-P-50650 - Projectile, 81Mm, H.E., M374A1 Metal Parts Assembly (Carbon Steel)
This specification covers Projectile 81MM, H. E. , M374A1 Metal Parts Assembly (Carbon Steel).
MIL-P-50718 - Projectile, 4.2 Inch, He M329A2 Metal Parts Assembly
This specification covers Projectile, 4.2 Inch, HE, M329A2 Metal Parts Assembly.
MIL-P-50784 - Projectile, 105Mm, He, M1 (Hf-1) Metal Parts Assembly
MIL-P-50791 - Projectile, 105Mm, Tpds-T, M737 Metal Parts Assembly
This specification covers the requirements and quality assurance provisions for the fabrication of parts, assemblies and packing of projectile 105mm, TPDS-T, M737
MIL-P-50793 - Projectile, Tp-T, 105Mm, M468 Metal Parts Assembly
This specification covers Projectile, TP-T, 105mm, M468.
MIL-P-51303 - Projectile, 81-Millimeter, Smoke, M375A3; Wp Filling
This specification covers the white phosphorus (WP) filling of the M375A3 projectile, without fuzing components.
MIL-P-51338 - Projectile, 105Mm, Smoke, Wp, M60E1, Filling Assembly
This specification covers the filling assembly with WP, of the 105MM, M60E1 projectile without fuzing components.
MIL-P-60090 - Projectile, 105Mm, Wp-T, M416, Filling Assembly
This specification covers the white phosphorus (WP) filling assembly of the M416 projectile, without fuzing components.
MIL-P-60300 - Projectile, 4.2 Inch, Wp, Smoke, M328A1, Loading Assembly (Use Mil-P-13041)
MIL-P-60447 - Projectile, 81Mm, Illuminating, M301A3 Parts Loading, Assembling And Packing
This specification covers the loading, assembling and packing for one type of mortar projectile designated as Projectile, 81MM, Illuminating, M301A3.
MIL-P-60521 - Projectile, Hep-T, 106Mm, M346A1 Metal Parts
This specification is the applicable detail specification for Projectile, HEP-T, 106MM, M346A1 Metal Parts.
MIL-P-60548 - Projectile, 105Mm, Smoke, Wp, M60 Metal Parts Assembly
This specification covers Projectile, 105MM, Smoke, WP, M60 Metal Parts assembly.
MIL-P-60574 - Projectile, Hep-T, 105Mm, M393A2 Metal Parts
This specification covers Projectile, HEP-T, 105MM, M393A2, Metal Parts.
MIL-P-60592 - Projectile, 90Mm, Tp-T, M353 Metal Parts Assembly
This specification covers Projectile, 90mm, TP-T, M353 Metal Parts Assembly.
MIL-P-60601 - Projectile, 105Mm, Wp, M416 Metal Parts Assembly
MIL-P-60603 - Projectile, Ap-T, 76Mm, M339 Metal Parts Assembly
This specification is the applicable detail specification for Projectile, AP-T, 76MM, M339, Metal Parts Assembly.
MIL-P-60620 - Projectile Assembly For Cartridge, Smoke, Wp, 81Mm, M375A1
This specification contains requirements and provides quality assurance provisions for the fabrication of parts, assemblies and packing of projectile assembly for Cartridge, Smoke, WP, 81MM, M375A1.
MIL-P-60626 - Projectile Assembly For Cartridge, H.E, 81Mm, M374E1
MIL-P-60646 - Projectile, 105Mm, Heat-T, M456A1 Metal Parts
This specification contains requirements and provides quality assurance provisions for the fabrication of parts, assembly and packing of one type of metal parts for HEAT-T, M456A1 Projectile
MIL-P-60811 - Projectile, 105Mm, Tp-T, M489 Metal Parts Assembly
This specification contains requirements and provides quality assurance provisions for the fabrication of parts, assembly and packing of one type of metal parts for TP-T, M489 Projectile.
MIL-P-60812 - Projectile, 4.2 Inch, Wp, Smoke, M328A1 Metal Parts Assembly
This specification covers Projectile, 4.2 Inch, W.P. Smoke, M328A1, Metal Parts Assembly.
MIL-P-60814 - Projectile, Ap-T, 90Mm, M318A1 Metal Parts
This specification covers Projectile, AP-T, 90mm, M318A1, Metal Parts.
MIL-P-60818 - Projectile, 4.2 Inch, Illuminating, M335A2 Metal Parts Assembly
This specification covers Projectile, 4.2 Inch, Illuminating, M335A2 Metal Parts Assembly.
MIL-P-60833 - Projectile, H.E, 4.2 Inch, M329Ai Metal Parts Assembly
MIL-P-60938 - Pellet, Smoke Marker For Cartridge, 105Mm: Apers-T, Xm546
This specification covers Pellet, Smoke Marker, made for use in Cartridge, 105MM: APERS-T, XM546.
MIL-P-63208 - Projectile, 105Mm, Heat-T, M622 Metal Parts
This specification contains requirements and provides quality assurance provisions for the fabrication of parts, assembly and packing of one type of metal pats for HEAT-T, M622 Projectile.
MIL-P-63293 - Projectile, 105Mm, Heat T Mp, M456A2 Metal Parts Assembly
This specification contains requirements and provides quality assurance provisions for the fabrication of parts, assembly and packing of one type of metal parts for HEAT-T-MP, M456A2 Projectile.
MIL-P-63448 - Projectile, 105Mm, Heat-T-Mp, M456A2 Spike And Cap Assembly
This specification contains requirements and provides quality assurance provisions for the fabrication and packing of the spike and cap assembly for HEAT-T-MP, M456A2 Projectile.
MIL-P-63510 - Projectile, 120Mm, Apfsds, Xm829 Metal Parts Assembly
MIL-P-63514 - Projectile, 105Mm, Tp-T, M489A1, Metal Parts Assembly
This specification contains requirements not covered by the drawings and provides quality assurance provisions for the fabrication of parts, assemblies and packing of projectile 105mm, TP-T, M489A1.
MIL-P-70439 - Projectile, 105Mm, M456A1 And M622 Spike And Cap Assembly
This specification contains requirements and provides quality assurance provisions for the fabrication and packing of the spike and cap assembly for HEAT-T, M456A1 Projectile.
MIL-P-70452 - Primer, Electric, M125 Metal Parts For
This specification covers the requirements and quality assurance provisions for the metal parts for the Primer, Electric M125.
MIL-P-70465 - Plug And Disc Assembly, 8597489
This specification provides requirements and quality assurance provisions for the fabrication and packaging of a plug and disc assembly, 8597489 for use in 76mm, 90mm, 105mm, and 120mm Tank Ammunition.
MIL-P-70524 - Projectile, 105Mm, He, Ra, Xm913/Xm927 Warhead Insulation Assembly For
This specification contains requirements and quality assurance provisions for the fabrication and packaging of the warhead body, insulator and warhead insulation assembly for 105mm, HE, RA, Projectile XM913 and XM927 (see 6.1).
MIL-P-70525 - Projectile, 105Mm, He, Ra, M913/Xm927 Motor Body Bonding Assembly For
This specification contains requirements and quality assurance provisions for the fabrication and packaging of the motor body, nozzle and motor body bonding assembly for 105MM, HE, RA, Projectile XM913/XM927 (see 6.11).
MIL-P-70528 - Cartridge, 105Mm, He, Ra, M913/Xm927 Delay Assembly Parts For
This specification contains requirements and quality assurance provisions for the fabrication and packaging of delay assembly parts for the 105MM Rocket Assisted Projectiles, XM913 and XM927.
MIL-P-70533 - Projectile, 105Mm, He, Ra Xm913/Xm927 Rocket Propellant For
This specification contains requirements and quality assurance provisions for the fabrication and packaging of the rocket propellant used in the XM913 and XM927, 105mm, HE, RA, Projectiles (see 6.1).
MIL-P-70543 - Projectile, 81Mm, Illuminating, M853A1 Projectile, 81Mm, Infrared Illuminating, Xm816 Metal Parts
This specification covers requirements, examinations and tests for metal parts and sub-assemblies for the projectile, 81mm, Illuminating, M853A1 and Infrared, Illuminating, XM816.
MIL-P-70819 - Primer, Electric, M128 Loading, Assembling And Packing
This specification contains requirements and provides quality assurance provisions for loading, assembling and packing of the M128 Electric Primer.
MIL-P-70997 - Projectile, 81Mm, He, M821E1/M889E1 Body Assembly (See Notice 2 For Replacement Information)
This specification covers requirements and quality assurance provisions for the projectile, M821E1 or M899E1, for use in the 81MM Mortar.
MIL-P-71031 - Propellant M45 For 120Mm Mortar M230 Propelling Charge
This specification establishes the requirements and quality assurance provisions for the manufacture and acceptance of extr
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business