INCH-POUND
MIL-DTL-0060944B (AR)
05 April 2004
USED IN LIEU OF
MIL-C-60944A (AR)
15 SEPTEMBER 1980
DETAIL SPECIFICATION
CARTRIDGE, 40MM - PRACTICE, M385A1
This specification is approved for interim use by the U.S. Army Armament Research, Development
and Engineering Center (ARDEC). Other activities in the Department of Defense may use this
interim revision or may continue using MIL-C-60944A (AR).
1. SCOPE
1.1 Scope. This specification covers the metal parts and loading, assembling and packaging
for one type of cartridge designated as Cartridge, 40MM: Practice, M385A1.
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 or 4 of this
specification. This section does not include documents in other sections of this specification or
recommended for additional information or as examples. While every effort has been made to ensure
the completeness of this list, document users are cautioned that they must meet all requirements of
documents cited in sections 3 or 4 of this specification, whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications, standards and
handbooks form a part of this document to the extent specified herein. Unless otherwise specified, the
issues of these documents are those cited in the solicitation or contract (see 6.2).
DEPARTMENT OF DEFENSE SPECIFICATIONS
MIL-P-60942
- Primer, Percussion for 40MM
MIL-A-8625
- Anodic Coatings for Aluminum and Aluminum Alloys
MIL-A-70625
- Automated Acceptance Inspection Equipment Design, Testing
and Approval of
Comments, suggestions, or questions on this document should be addressed to: Commander, US
Army ARDEC, ATTN: AMSRD-AAR-QES-E, Picatinny, New Jersey 07806-5000, or e-mailed to
ardec-stdzn@pica.army.mil. Since contact information can change, you may want to verify the
currency of this address information using the ASSIST Online database at https://assist.daps.dla.mil
AMSC N/A
FSC 1310
DISRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business