MIL-C-70614 (AR)
4.
QUALITY ASSURANCE PROVISIONS
4.1 Responsibility for inspection. Unless otherwise
specified in the contract or purchase order, the contractor is
responsible for the performance of all inspection requirements
as specified herein. Except as otherwise specified in the
contract or purchase order, the contractor may use his own or
any other facilities suitable for the performance of the
inspection requirements specified herein, unless disapproved by
the Government. The Government reserves the right to perform
any of the inspections set forth in the specification where such
inspections are deemed necessary to assure supplies and services
conform to prescribed requirements. Unless otherwise specified
herein or in the contract, the provisions of MIL-A-48078 shall
apply and are hereby made a part of this detail specification.
4.1.1 Responsibility for compliance. All items must meet
all requirements of Section 3 and 5. The inspection set forth
in this specification shall become a part of the contractor's
overall inspection system or quality program. The absence of
any inspection requirements in the specification shall not
relieve the contractor of the responsibility of assuring that
all products or supplies submitted to the Government for
acceptance comply with all requirements of the contract.
Sampling in quality conformance does not authorize submission
of known defective material, either indicated or actual, nor
does it commit the Government to acceptance of defective
material.
4.2 Classification of inspections. The following types of
inspection shall be conducted on this item:
First Article Inspection
a.
b.
Quality Conformance Inspection
4.3 First article inspection.
4.3.1 Submission. The contractor shall submit a first
article sample as designated by the contracting officer for
evaluation in accordance with provisions of 4.3.2. The first
article sample shall consist of the components in the quantities
described in Table I.
See MIL-A-48078 and
4.3.2 Inspections to be performed.
Table II specified herein.
4.3.3 Rejection. See MIL-A-48078 and the first article
ballistic test shall be rejected per Table II criteria.
4
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business