MIL-C-70501 Charge, Propelling, M204, Paper Preform Process Parts And Container AssemblyThis specification covers requirements, quality assurance provisions and packaging for the parts and container assembly manufactured by the paper preform process for the propelling charge designated as Charge, Propelling, M204 and used on the ammunition for the Lightweight Company Mortar System \(LWCMS\).

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10

MIL-C-70501

(AR)

anvil and ball spindle micrometer. Inner diameter, outer

diameter, and base thickness measurements are to be obtained

and shall be in accordance with the applicable drawing.

b. After the die-press setups have been qualified with

solder, fifteen each parts shall be processed through each die

and measured for inner and outer diameters, and base thickness.

All dimensions shall be in accordance with the applicable draw-

ing.

c. All measurements obtained during die�press qualifica-

tion shall be maintained on file and shall be available for

The die-press set-ups shall not be approved

government review.

for use in production if any part, assembly or solder set-up

fails to comply with above requirements.

d. All die-press set-ups shall operate against the

established stop and meet an established dwell time.