MIL-C-48654(AR)
for the submission of first article samples by the contractor
shall be as specified in the contract.
3.10 Workmanship. All parts and assemblies shall be
fabricated and loaded in a thorough workmanlike manner. They
shall be free of burrs, sharp edges, cracks, dirt, rust and other
foreign matter. The cleaning method used shall not be injurious
to any part nor shall parts be contaminated by the cleaning
agent. All required markings shall be neat and sharply defined.
4. QUALITY ASSURANCE PROVISIONS
4.1 Responsibility for inspection and standard quality
assurance provisions. Unless otherwise specified herein or in the
contract, the provisions of MIL-A-48078 shall apply and are hereby
made a part of this detail specification.
4.2 Classification of inspections. The following types of
inspection shall be conducted on this item:
First Article Inspection
a.
Quality Conformance Inspection
b.
4.3 First article inspection
4.3.1 Submission. The contractor shall submit a first
article sample as designated by the contracting officer for
evaluation in accordance with provisions of 4.3.2. The first
article sample shall consist of the components in the quantities
indicated in Table I.
See MIL-A-48078 and Table
4.3.2 Ins pection to be performed.
I specified herein.
See MIL-A-48078
4.3.3 Rejection.
4
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business