INCH-POUND
MIL-DTL-12235A (MR)
19 May 2009
.
SUPERSEDING
MIL-P-12235 (PA)
27 September 1952
w/AMENDMENT 1
8 November 1954
DETAIL SPECIFICATION
PROJECTILE, PLATE-PROOFING (FOR IMPACT OR SHOCK TESTING) 37mm M1000,
57mm M1001, 75mm M1002, 90mm M1003, 105mm M1004, 20mm M1005, 57mm M1001A,
and 75mm M1002A
This specification if approved for use within the Department of the Army, and is available for
use by all Departments and Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers plate-proofing projectiles made from steel and aluminum
bar stock for use in impacting or shock-testing armor, armor weldments, and other armor
structures (see 6.1).
1.2 Classification. The plate-proofing projectiles will be of the class and type specified in the
contract or purchase order (see 6.2).
1.2.1 Classes.
1.2.1.1 Class 1. Plate-proofing projectiles made from steel bar stock will be classified as Class 1.
Comments, suggestions, or questions on this document should be addressed to: Director, U.S.
Army Research Laboratory, Weapons and Materials Research Directorate, Materials
Applications Branch, Specifications and Standards Office, Attn: AMSRD-ARL-WM-MC,
Aberdeen Proving Ground, MD 21005-5069 or emailed to rsquilla@arl.army.mil. Since
contact information can change, you may want to verify the currency of this address
information using the ASSIST Online database at https://assist.daps.dla.mil/.
AMSC N/A
FSC 1310
DISTRIBUTION STATEMENT A: Approved for public release; distribution is unlimited.
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business